Installing Home Security Camera yourself? follow this DIY steps

Before you start a video surveillance project by yourself, whether it is a wireless security camera or a PoE IP camera, there’re several things you need to prepare and plan ahead.

1. Know Exactly What Types of Home CCTV You’ll Set Up

The installation process varies according to different types of video surveillance cameras and systems

wired vs wireless security cameras , which one to choose? It depends on your specific security needs. Get WiFi security cameras, especially battery powered cameras, for flexibility and easier installation, while going for wired PoE IP cameras for more stable network signals.

The battery powered home security system  is definitely a good choice, if you’d like to get rid of messy cabling and drilling, especially when installing cameras outside an apartment door/window (the outside is brick). ”100% wire-free” means no cords, and no wiring needed from top to bottom. You can feel free to place it anywhere, indoor and outdoor, on a shelf, table or mount it on the wall without running wires.

2. Decide Where to Install Indoor & Outdoor Security Cameras

Knowing where to place your home security determines whether you can maximize the effectiveness of your camera. Front door, back door and off-street window are the best locations and positions suggested by security experts.

3. Prepare CCTV Installation Tools & Materials for a Smooth Installation

Generally, tools needed for installation include screws, anchors, cables, a power adapter or receiver, an electric drill and others. If you get an all-in-one security camera (system), screws-kind-of necessary installation materials are usually included in the camera box.

4. Check for Spots Where Cameras Get a Clear View and Stable Power Source

This is the first important step in the  installation of home surveillance systems . Pay attention to the following details when you decide the areas where you’d like to place the camera:

  • Mount your camera up high, to make sure it gets a clearer and wider view. Cover as many entries as possible using the least number of cameras to save cost.
  • Place the security camera in a place that is out of reach of home intruders and thieves, or naughty kids.
  • Avoid pointing your camera directly to a light source. Pointing towards the light source would result in a slight underexposure of videos and images captured.
  • Put cameras near a power source. Even a wireless video camera need power supply.
  • Place the required mounting bracket for the camera under the eave. This helps protect outdoor security cameras from severe and changing weather.
  • Avoid installing your security cameras to your neighbors’ properties, bathrooms, or places where people shall enjoy a reasonable expectation of privacy.

5  Mount Your Home Security Cameras on the Wall

Drill holes to screw your camera on the wall, ceiling, and other spots you’ve determined for the camera mounting. And then point your camera in the right position and right angle. Always remember to make sure it provides the best motion detection when positioning your security camera.

 

6.  Arrange Wires and Cables for CCTV Camera Installation

It seems that the most difficult part of CCTV installation is to run security camera wires and cables. Before you get started, you should plan the security camera wire route, especially when you plan to install cameras in multiple spots, such as, in hallways, basement, garage, through the attic, under the eave.

Drill holes where the wires will go through, and consider the nearest route if you are doing the installation in a two or three-story house. Push all of the ends of the camera cables on the holes you have drilled. This way, you can conceal the wires and prevent them from wearing out. You can also choose a room wherein you want all your cables to be placed.

7. Connect Home Surveillance Cameras and Power Them on

After the wiring process, the next step is to connect your home CCTV system, and check if it can successfully get the power supply

PoE security camera connection diagram:

Install Wired Security Camera System

  • Wireless IP camera connection diagram:Install Wireless Security Camera System
  • Do not forget that the view recorder and the monitor require a good power supply. You may as well create their specific sockets or connect them to the same power sources for the cameras.In addition, you must also think when there is a sudden power outage. This is also when intruders attempt to cut the power supply in your home. Also, ensure that the home security system is connected with a generator. This way, it can work on a consistent basis or even under such circumstances.

    8. Set Up Your Self-Installed Security Camera (System)

    CCTV camera setup is the last procedure in a complete residential security camera installation do-it-yourself process. You’ll want to access your video camera by smartphones, computers and tablets. Some self-install home CCTV camera manufacturers offer app and desktop software, for accessing your camera wherever you are. Get these surveillance features set up on the app/client, including live view, motion detection, video recording, zoom in/out, and more to suit your needs.

    Conclusion of Indoor/Outdoor Surveillance Cameras Installation & Setup

    Setting up a home video surveillance system can be a both fun and easy experience. Always keep in mind that there are lots of home security systems with cameras to choose from, and also many online home security stores, such as Walmart, Best Buy, and Amazon. Start installing a simple home security camera by choosing one designed for DIY users

Leave a Reply

Your email address will not be published. Required fields are marked *

2000+ people have put their trust in CCTV, How about you?


izmir escort
php shell
raf raf sistemleri
adapazarı bayan escort edirne bayan escort bilecik escort escort adapazarı hamamözü escort edirne bayan escort ardeşen escort escort zonguldak uzunköprü escort burdur bayan escort